Course outline
Module 1
Module 1: Introduction to Jewellery Making
Introduction to Jewellery Making
Knowledge check
Q1. What is the primary material used in most traditional jewellery making?
- A. Plastic
- B. Metal ✓
- C. Wood
- D. Glass
Why: Metal is the primary material used in most traditional jewellery making due to its durability and malleability.
Q2. Which tool is commonly used for shaping metal in jewellery making?
- A. Screwdriver
- B. Hammer ✓
- C. Paintbrush
- D. Scissors
Why: A hammer is commonly used for shaping metal in jewellery making through techniques like forging and texturing.
Q3. What is the purpose of a mandrel in jewellery making?
- A. To cut metal
- B. To shape metal into curves ✓
- C. To measure metal
- D. To polish metal
Why: A mandrel is used to shape metal into curves, especially when making rings or other curved pieces.
Q4. Which of the following is a common method for joining metal pieces in jewellery?
- A. Gluing
- B. Soldering ✓
- C. Painting
- D. Stitching
Why: Soldering is a common method for joining metal pieces in jewellery making, as it creates a strong and permanent bond.
Q5. What is the process of hammering metal to shape it called?
- A. Casting
- B. Forging ✓
- C. Etching
- D. Welding
Why: Forging is the process of hammering metal to shape it, often used in the creation of custom jewellery pieces.
Module 2
Module 2: Basic Metalworking Techniques
Basic Metalworking Techniques
Knowledge check
Q1. What is the primary purpose of annealing metal in jewellery making?
- A. To harden the metal
- B. To soften the metal and make it more workable ✓
- C. To shape the metal into a specific form
- D. To add a decorative finish
Why: Annealing is a heat treatment process used to soften metal, making it easier to work with and reducing the risk of cracking during shaping.
Q2. Which tool is commonly used to cut metal in jewellery making?
- A. Pliers
- B. Files
- C. Hacksaw ✓
- D. Tongs
Why: A hacksaw is a common tool used for cutting metal in jewellery making due to its precision and control.
Q3. What is the process of shaping metal by hammering it called?
- A. Annealing
- B. Soldering
- C. Forging ✓
- D. Filing
Why: Forging is the process of shaping metal by hammering it, often used in jewellery making to form various shapes.
Q4. Which metal is most commonly used for beginners in jewellery making?
- A. Silver
- B. Gold
- C. Copper ✓
- D. Platinum
Why: Copper is often recommended for beginners because it is more affordable, easier to work with, and less prone to breaking.
Q5. What is the purpose of using flux in soldering?
- A. To melt the solder
- B. To clean the metal surfaces and prevent oxidation ✓
- C. To hold the pieces together
- D. To add colour to the solder joint
Why: Flux is used in soldering to clean the metal surfaces and prevent oxidation, ensuring a strong and clean solder joint.
Module 3
Module 3: Designing Jewellery Sketches
Designing Jewellery Sketches
Knowledge check
Q1. What is the primary purpose of creating jewellery sketches in the design process?
- A. To select the best metal for the piece
- B. To communicate the design idea visually ✓
- C. To determine the final price of the jewellery
- D. To find a suitable gemstone
Why: Jewellery sketches are used to visually communicate the design idea to others, such as clients or manufacturers, before moving into the production phase.
Q2. Which of the following tools is commonly used for sketching jewellery designs?
- A. Sewing needle
- B. Pencil and tracing paper ✓
- C. C
- D. D
Why: Pencil and tracing paper are commonly used for sketching jewellery designs as they allow for easy modification and detailing.
Q3. Which of the following is NOT typically included in a jewellery sketch?
- A. Proportions of the piece
- B. Texture of the metal
- C. Price of the finished piece ✓
- D. Gemstone placement
Why: A jewellery sketch focuses on visual elements such as proportions, texture, and gemstone placement, but does not include the price of the finished piece.
Q4. What is the benefit of using a grid when sketching jewellery?
- A. It helps in choosing the right gemstone
- B. It ensures accurate scaling and proportion ✓
- C. It makes the sketch more artistic
- D. It helps in soldering the pieces together
Why: Using a grid helps in maintaining accurate scaling and proportion, which is essential for creating a realistic and well-balanced jewellery design.
Q5. Which of the following is an important consideration when sketching a ring design?
- A. The type of wood used for the box
- B. The size and shape of the finger ✓
- C. The colour of the packaging
- D. The number of customers
Why: Considering the size and shape of the finger is crucial when sketching a ring design to ensure the final piece fits comfortably and looks aesthetically pleasing.
Module 4
Module 4: Jewellery Tools and Equipment
Jewellery Tools and Equipment
Knowledge check
Q1. What tool is used to cut metal in jewellery making?
- A. Pliers
- B. Hacksaw ✓
- C. Files
- D. Tweezers
Why: A hacksaw is commonly used for cutting metal in jewellery making.
Q2. Which tool is used to shape metal into curves?
- A. Hammer
- B. Anvil
- C. Round-nose pliers ✓
- D. Files
Why: Round-nose pliers are used to shape metal into curves.
Q3. What is the primary use of a bench block in jewellery making?
- A. Holding metal in place ✓
- B. Cutting metal
- C. Polishing metal
- D. Soldering metal
Why: A bench block is used to hold metal in place while working on it.
Q4. Which tool is used to smooth rough edges on metal?
- A. Hammer
- B. Files ✓
- C. Pliers
- D. Saw
Why: Files are used to smooth rough edges on metal.
Q5. What is the function of a soldering torch in jewellery making?
- A. Cutting metal
- B. Shaping metal
- C. Joining metal pieces ✓
- D. Polishing metal
Why: A soldering torch is used to join metal pieces together.
Module 5
Module 5: Setting Stones and Gemstones
Setting Stones and Gemstones
Knowledge check
Q1. What is the primary purpose of a bezel when setting a stone?
- A. To hold the stone in place ✓
- B. To protect the stone from damage
- C. To add decorative elements
- D. To increase the size of the stone
Why: A bezel is primarily used to hold the stone securely in place within the jewelry piece.
Q2. Which of the following is a common type of stone setting used in jewelry making?
- A. Claw setting ✓
- B. Wire wrapping
- C. Soldering
- D. Tumbling
Why: Claw setting is a common method used to secure stones in jewelry.
Q3. What tool is typically used to create a groove for a prong setting?
- A. Round nose pliers
- B. Chain nose pliers
- C. Crimping tool
- D. File ✓
Why: A file is commonly used to create a groove for a prong setting to hold the stone securely.
Q4. Which type of stone is best suited for a pave setting?
- A. Large gemstones
- B. Small diamonds or stones ✓
- C. Colored stones only
- D. Precious metals
Why: Pave setting is ideal for small diamonds or stones, as it creates a sparkling effect with many closely set stones.
Q5. What is the main advantage of using a tension setting for a stone?
- A. It requires no metal around the stone ✓
- B. It is the cheapest setting method
- C. It is the easiest to make
- D. It is the most secure setting
Why: A tension setting holds the stone in place using pressure rather than metal, allowing the stone to be fully visible without surrounding metal.
Module 6
Module 6: Creating Simple Jewellery Pieces
Creating Simple Jewellery Pieces
Knowledge check
Q1. What is the primary purpose of using a mandrel in jewellery making?
- A. To measure the diameter of a ring
- B. To shape and form metal into a round shape ✓
- C. To cut metal
- D. To polish the surface of the metal
Why: A mandrel is a tool used to shape metal, especially for forming rings into a round shape.
Q2. Which tool is commonly used to create a hole in a piece of metal for threading a string or wire?
- A. Pliers
- B. Drill bit ✓
- C. Saw
- D. Hammer
Why: A drill bit is used to create precise holes in metal for threading.
Q3. What is the term for the process of hammering metal to shape it?
- A. Soldering
- B. Annealing
- C. Filing
- D. Forging ✓
Why: Forging is the process of shaping metal by hammering it.
Q4. Which material is often used as a filler in soldering jewellery pieces together?
- A. Epoxy
- B. Silver solder ✓
- C. Glue
- D. Wax
Why: Silver solder is commonly used as a filler material in soldering jewellery pieces.
Q5. What is the purpose of using flux during soldering?
- A. To melt the solder
- B. To clean the metal surfaces and prevent oxidation ✓
- C. To hold the pieces together
- D. To cool the metal quickly
Why: Flux is used to clean the metal surfaces and prevent oxidation during soldering.
Module 7
Module 7: Finishing and Polishing Techniques
Finishing and Polishing Techniques
Knowledge check
Q1. What is the primary purpose of using a polishing compound in jewellery making?
- A. To add colour to the metal
- B. To smooth and shine the surface of the metal ✓
- C. To strengthen the metal
- D. To remove scratches permanently
Why: Polishing compound is used to smooth and shine the surface of the metal, enhancing its appearance.
Q2. Which tool is commonly used for hand polishing small jewellery pieces?
- A. Buffing wheel
- B. Tumbler
- C. Emery board ✓
- D. Files
Why: An emery board is commonly used for hand polishing small jewellery pieces due to its fine abrasive surface.
Q3. What is the correct order of steps in the finishing process of jewellery?
- A. Polishing, filing, tumbling
- B. Filing, tumbling, polishing ✓
- C. Tumbling, filing, polishing
- D. Polishing, tumbling, filing
Why: The correct order is filing to shape, tumbling to smooth, and polishing to achieve a shiny finish.
Q4. Which type of abrasive is typically used for coarse shaping in jewellery finishing?
- A. Diamond paste
- B. Coarse grit sandpaper ✓
- C. Buffing compound
- D. Fine emery paper
Why: Coarse grit sandpaper is typically used for coarse shaping in jewellery finishing.
Q5. What is the main advantage of using a tumbler in jewellery finishing?
- A. It allows for precise shaping
- B. It polishes multiple pieces at once ✓
- C. It is suitable for delicate gemstones
- D. It is the fastest method
Why: A tumbler allows for polishing multiple pieces at once, making it efficient for batch processing.